Ikea Lack filament guide passthrough
11,065
visitas
394
descargas
12
colecciones
0 comentarios
Cargando comentarios... 
Ikea Lack filament guide passthrough
3D
Published 2017-03-10T11:50:41+00:00
91
0
Add to Collection
Descripción
This is an easy, quick to print filament guide for IKEA Lack table. It accepts PTFE tube if you want to fit it with reverse bowden setup or you can turn it around and guide filament through the tube from your dry box. It's held in place using a simple clip that's included.
Detalles de impresión
I only tested this in PETG and I'm not sure if the clip works with PLA since it has to flex a little to be fitted. If anyone tries PLA I'd be happy to hear your feedback.
To install this item you'll need to drill an 8mm hole through the table. Then just slide through and secure with a clip.
Información técnica
| Date published | 10/03/2017 |
| ¿Cuándo tiempo lleva? | 20 - 40 minutos |
| Cantidad de filamento | 2 grams |
| Dimensiones | 34 x 20 x 55 mm |
| Tecnología | FDM |
| Sin apoyo | YES |
Más información
Archivos