Iron Jack
Iron Jack
3D
Published 2014-02-24T10:47:47+00:00
Ironjack is a multi-pose robot model. This fantastic action figure has 59 parts which are jointed for an amazing total of 20 points of articulation.
All the parts clip together to make a glue free model. Lots of new designs are in the works for TinHead and Ironjack you will be able to download new arms, heads, legs, all very soon.
All pieces are compatible with Tinhead.
Print all the parts once, we have provided left and right parts for everything.
Clean off support, the joints should not need much cleaning, the inside of of the joints are accurately designed so they will be tight without any modification.
Print in a couple of colours for variation. Our Print is 26cm high, you can scale up to this size or bigger, if you print at a smaller size be careful when you remove the support.
Enjoy and have fun!
| Date published | 24/02/2014 |
| Dimensiones | 210mm/120mm/60mm |
| Complejidad | Muy difícil |
Printed in ABS at 100 microns. Had to do a lot of sanding and cutting to get the parts to fit due to ABS shrinkage. The hands were my original design.