Monster Hunter Generations - Astalos Thunder Blade
Monster Hunter Generations - Astalos Thunder Blade
Published 2017-02-21T10:40:27+00:00
I think I'm still in so here I go! We are 3D Cosprops and that's our 3D model for the Capcom challenge!
I have seen a lot of projects this month and I wanted to do something different. I designed this blade taking Astalos as reference. Since always I have liked all the electric monsters of this saga (Lagiacrus, Zinogre... and now Astalos) and I wanted to make something that would have more similarity than just the shape. If you take a look at the photos of the references, you will see that this blade is created taking some parts of the monster but not just that, if you look closely to the gem decoration, it was a reference to the eye of Astalos. In some photos it's green but sometimes it turns orange, I decided to add this feature to the blade too. How? That's the other similarity, I added the type of the monster by adding leds inside (electric type), so it also glows in the dark.
This model is 55cm long but it was scaled to be able to print it in time.
If you have any questions you can contact us in this page: https://www.facebook.com/3DCosPropsandMore/
E-mail: carlessa1992@gmail.com
Details:
Layer height: 0.15 mm
Fill density: 25%
Print speed :50 mm/s
Material: ABS
Approximate printing time: 43 - 46 h
This model needs support material because of the leds cavity.
I have added the blade in one piece and divided in three to help people to print it.
Date published | 21/02/2017 |
¿Cuándo tiempo lleva? | - 2760 minutos |
Tecnología | FDM |