Multipurpose Potion Bottles
Sin soporte
Destacado
15,674
visitas
2,138
descargas
46
colecciones
15 comentarios
Cargando comentarios... 
Multipurpose Potion Bottles
3D
Published 2018-09-14T15:12:09+00:00
824
15
Add to Collection
Descripción
I've been experimenting a lot with Vase Mode lately and wanted to make something very useful and easy to print so I came up with these designs. Here are a few things that you can use these designs for:
- Plantor
- Candy/Sweets Container
- Oil/Soap Bottle
- Sending love messages the 3D-Printing way ;)
- ... And a lot more!
To make your bottles sturdy and liquid-proof, you can do the following:
- Use thicker nozzle(I printed most of these using 0.6mm ~ 1.2mm layer thickness using 0.6 & 0.8 nozzles)
- Add more bottom layers (5~7 should work for most)
- Increase your flow percentage or extrusion multiplier
The following materials were used to produce these prints:
- Sainsmart light wood
- Colorfabb Trans Green
- Fillamentum Crystal Clear Iceland Blue
- Fillamentum Timberfill Cinnamon
- Makergeeks FDA approved Trans
- Tops/covers printed in Colorfabb NGEN_FLEX
If you like these prints, please consider liking and commenting. If you print and use these bottles, make sure to share your work! I'd love to see what you do with these models!
Detalles de impresión
- Print Potion-6 file using high resolution(0.15mm or higher res) otherwise the print might fail since it has some steep overhangs.
- Depending on what you wanna store inside your bottle you might want to print using various materials to suit the job(Wood, PP, PETG, PLA or ABS)
Información técnica
| Date published | 14/09/2018 |
| ¿Cuándo tiempo lleva? | - 200 minutos |
| Cantidad de filamento | 15 |
| Dimensiones | 50x50x100 |
| Tecnología | FDM |
| Complejidad | Fácil |
| Sin apoyo | YES |
Más información
Archivos