MWO Hellbringer
MWO Hellbringer
3D
Published 2018-09-03T08:38:08+00:00
MechWarrior Online Hellbringer, roughly 130mm tall.
Fully articulated, and tested, all parts are error free and printer friendly. Multiple Torso and weapon options, and like the Atlas, does not require any glue for assembly. I used a scale table from Mech Warrior Online to scale the 'Mech. But if you would like to print it a little bit smaller, most of the detail and joints should still print/work at 75% ~though I have not tested this.
Print Settings~
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.15
Infill:
10%
Notes:
All the parts have been checked for errors and repaired. All the joints and pins have been test printed multiple times, and in varying orientations, and while some orientations are not the best suited for detail preservation, in all cases the pins/joints worked. So you should not have any problems.
Printing Instructions:
MWO_Hellbringer_LeftLeg_Foot (Flip LeftLeg_Foot in X-axis for right leg) [Print 2]
MWO_Hellbringer_LeftLeg_Lower (Flip LeftLeg_Lower in X-axis for right leg) [Print 2]
MWO_Hellbringer_LeftLeg_Knee (Flip LeftLeg_Knee in X-axis for right leg) [Print 2]
MWO_Hellbringer_LeftLeg_Top (Flip LeftLeg_Top in X-axis for right leg) [Print 2]
MWO_Hellbringer_Waist [Print 1]
MWO_Hellbringer_TorsoPin [Print 1]
MWO_Hellbringer_Torso (Four options) [Print 1]
*Some of the Torso options have weapon attachment slots, where any of the "MWO_Hellbringer_Weapon_"'s can be used [Print 1 or 2 depending]
MWO_Hellbringer_LeftArm_Shoulder (Flip LeftArm_Sholder in X-axis for right arm) [Print 2]
MWO_Hellbringer_LeftArm_UpperPt1 (Flip LeftArm_UpperPt1 in X-axis for right arm) [Print 2]
MWO_Hellbringer_LeftArm_UpperPt2 (Flip LeftArm_UpperPt2 in X-axis for right arm) (Two options) [Print 2]
MWO_Hellbringer_LeftArm_Lower (Flip LeftArm_Lower in X-axis for right arm) [Print 2]
MWO_Hellbringer_LeftArm_Elbow_V2 (Flip LeftArm_Elbow in X-axis for right arm) [Print 2]
MWO_Hellbringer_LeftArm_Hand (Flip LeftArm_Hand in X-axis for right arm) (Ten options) [Print 2]
*Some of the Hand options have weapon attachment slots, where any of the "MWO_Hellbringer_Weapon_"'s can be used [Print 1 or 2 depending]
If you experience any problems, or would like to ask me something, please leave a comment.
| Date published | 03/09/2018 |
| Tecnología | FDM |
| Complejidad | Fácil |
A terrific design by BobertmaX, with tons of details. Painted with Createx acrylics and a bit of MIG Ammo Starship Wash.