Naughty-or-Nice-o-Matic (Tinkercad Christmas)
Naughty-or-Nice-o-Matic (Tinkercad Christmas)
3D
Published 2017-12-12T13:12:02+00:00
Ho! Ho! Ho! Did you ever wonder how Santa knows so readily who's been naughty, and who's been nice? Well, he could obviously check your social media profile, but Santa is a bit old school. A bit retro. He uses the Naughty-or-Nice-o-Matic!
Check out the sleek CRT scanlines, and the crazy 50's angles! The Naughty-or-Nice-o-Matic is a piece of rocket-age science that is bound to bring joy to your modern Christmas.
THE DETAILS
The main feature of this print is the screen! As you may have guessed, there are two potential displays, between which one switches by sliding a panel underneath a grille, and thereby exposing a different part of the display. Naughty! Nice! Naughty! Nice! The grille element has flexing catches that keep the screen panel in place, and allow it the 1mm movement needed to alter what's shown.
In terms of assembly, the lid and base are set up to allow M3 bolts to tap into the case. However, the printable bolts will also fit. Or, you can just glue it all together, which works just fine, too.
LINKS
This object was made in Tinkercad. https://www.tinkercad.com/things/hsYhChl1G1y
There are some angled parts here, but no crazy overhangs. You might want to watch the speed on the antenna, but since the printer needs to move between the two parts, it probably has plenty of time to cool down between layers.
Now, the screen grille is naturally going to be at the mercy of a neat print. Elephant footing is not your friend, here. Try to keep it clean!
The screen itself needs a filament colour change as close to the top layer as possible for best effect - or you can just paint it after the fact!
Enjoy!
| Date published | 12/12/2017 |
| Tecnología | FDM |
| Sin apoyo | YES |