Loading
Overwatch - Tracer Full Figure
3D
Published 2017-08-14T19:58:26+00:00
Overwatch - Tracer Full Figure
3D
Published 2017-08-14T19:58:26+00:00
Follow Us on Facebook for the latest info and a chance to vote what i sculpt next
"the Cavalry's here"
The character, who is of British origin, has been noted by video game outlets to be a peppy and energetic character. In regards to her gameplay mechanics, Tracer is one of the game's fastest characters in terms of speed, but weakest in terms of health. She makes use of her speed through teleportation and time traveling abilities that are caused by an in-universe accident, which left her unable to maintain a physical form in the present time, until Winston invented the chronal accelerator, a device allowing her to control her physical form.
This should be a fairly easy print. build up the parts and join them together. i will be doing a bust only version next.
| Date published | 14/08/2017 |
| Tecnología | FDM |
| Complejidad | Medio |
Printed at 170% scale, head and arms 30% infill and 40mm/s speed, and body and legs were printed with 25% infill and 60mm/s speed. Legs got a little problem when printed, but still the result was awesome for me.
Print at 300% scale. This is a great model! So wonderful!
Printed on Ultimaker 3 - 28cm tall, with PVA support Awesome statue! Hope Widowmaker is next!
Tiny Tracer. Maker Ultimate.
Looks great! Scaled at 300%
Got mine printed at 300% and 400%, I'm still working on the Base to add some LED/Neopixels
Printed it in 150% scale, But I think it's too small for all the details in the model. Have to print it scaled 300% at least I guess
Scaled 320%. 28cm tall. Printed on Wanhao i3 v2.1. Pure awesomeness!
Priter: CraftBot 2 ++ 0,2 layer
Printed in parts at 200%, 0.2mm Layers in ABS. Sanded with rotary tool and painted in "Sporty" skin
300% After printing I thought I was too greedy, I might need a smaller base to display on my desk........... to save some space for my next print, which will be D.Va
Amazing Detail on the Design, used SLA and FDM tecnologies ont his one, printed on several parts and joined together.
Printed at 100% at .2
Hi ! Thank you for this fantastic sculpt :). My personnal print on Form2 :
Just a test print using my CR-10... was doneat 100% in .2 layer height.. I do plan however to size it up 350% and print at .1 layer height. Beautiful model.
needs a little cleanup, but so far so good. Printed at 350% at .1 layer height... still working on the rest
More progress. Working on the legs now
Excelente modelado! Felicitaciones!
I printed the Tracer with my Polaris LCD Printer. x3 size.
100 micron Layer height, 50% infill.
Size: 250%
Printed at 200%. Printed everything but the base only to realize the base at 200% is too big for my Monoprice Mini to print so I had to make a custom base for her which you can download here. https://www.myminifactory.com/object/53622
300% Scale. Still going to paint more just primed.
First of a set of Overwatch characters for my family. Thanks for the very nice model. 0.2 mm layer height. Cut down the pedestal height a little. Thought I'd try the full model in one print. Sliced and auto supports in Simplify3D. As printed picture with supports is shown here too. Ran the filament too hot so a bit of stringing. Nevertheless it cleaned up quite well. One day I'll try to print and paint.
i did it at 500% on my cr-10s
I made it in 200% scale :]
There's mine...will paint it with an airbrush! Printed 300%
This was my very first "bigger" print. Printed it at 300% (Layer 0,1) I love how it turned out! Thank you so much for this!
And done, 300% scale, primed and sprayed!
Scaled 222%
Nice model, Fun to paint 100mm tall at .2mm resolution
towering above all, printed at 300%, absolutely beautiful model
Print all in one with transparent PLA 0.2 layer height, support are generated by meshmixer
Awesome model. Thanks a lot!
This was one of my earlier prints that had a lot of artifacts so I used paint to hide them! It was also my first time painting a large model.
300% Layer 0,1
My X-CUBE V3 prints exposure for 10 seconds. The support is added by Magics 21. The support is a bit simplistic. Hahaha. Handsome model.
Excelente diseño, fácil de imprimir
printed as fully assembled! with full supports!
Printed at 300% and she came out nice. When I was smoothing the legs after primer I snapped one but it went together nicely and a little wood filler did the trick. I'm most happy about the painting on the leggings.
this was the very first model i downloaded about 6 months ago, just got the chance and nerves to print her, she was scaled to 300% .1 layer height on Original Prusa MK3, she was sanded using multiple methods and primed to paint.
Printer FlyingBear Ghost 4. Zoom 150%, slicer Cura, nozzle 0.4mm, wall count 2, layer height 0.1mm, speed 90 mm/s (wall 60mm/s). Printed 5 parts separately. Plastic: PLA. Nice model! Thanks to author!
mi primera imprecion con el delta altura de capa de 0.15 aumentado 400% , estoy iniciando con las pinturas acrílicas en este caso use tipo mate .. espero que le guste al grupo
This was my first successful print off my own printer! Such a fantastic model to print. Longer Orange 30.
My first successful print!
first model I printed in parts. I did struggle to stick them together but the parts printed out excellently amazing model. thank you
Second print of modelof this author
Thanks for this greate model
Thanks!!!
Quarantine time? Printed back in January, it was time to paint it!
Thank you for my first experience in painting!)
personnage en résine et socle en pla
https://youtu.be/XBWXu8-zbuQ
First painting)
printed with Siraya Tech Build
Printed and painted a while back :) (amazing model)
As always, excellent model from Printed Obsession
my first printing and first painting thanks for this great model i scaled %300 only head is 0.1mm layer heigt //the other parts 0.2mm layer heigt i need the improve myself
Amazing print!!! Thank for making such nice prints for free!
We also did our own version, a super cool model! Congrats!
Отличнейшая модель. Увеличил в 2,5 раза распечатал на FDM Все очень хорошо пропечаталось. Теперь стоит на столе радует глаз!
I printed this and it was a great file to work with. I chose to print it in separate parts and printed it at 300% I also created a video on it as well: https://youtu.be/fJdxtrYKfwQ Love this project