Paper stand, paper holder
2,713
visitas
140
descargas
0 comentarios
Cargando comentarios...
Paper stand, paper holder
3D
Published 2019-02-25T19:18:10+00:00
8
0
Add to Collection
Descripción
-Print in 0.2 mm layer height, I printed it with 0.3 mm (for faster print speed) but results are much better with 0.2 mm height.
-Be careful with how you place stand on the printing bed, because of the overhang (5 mm) at the bottom (where pusher is attached). But my Ender 3 printed overhang with no problem.
-For the better result glue the pusher in the stands slot with superglue.
-In the files attached there is one 38 mm width pusher, but in the pictures you can see I made two 13 mm pushers with 12 mm spacer in between (13 mm +13 mm+12 mm= 38 mm slot width).
-If you print it please upload picture in comments :D
Información técnica
Date published | 25/02/2019 |
Tecnología | FDM |
Sin apoyo | YES |
Más información
Archivos
Had to do some re-working but it came out nice. Stuck it to my wall using the Command Picture Hanging straps. Used 3, 9 lb horizontally placed in the 3 spaces in the middle.