pimp my prusa x motor camera mount (growing timelapse effect)
pimp my prusa x motor camera mount (growing timelapse effect)
3D
Published 2019-01-10T12:15:07+00:00
*update: added logi c270hd mount (logi-mount-v2)*
on logi c270hd all the stand parts need to be removed. then the logi-mount-v2 mounts to the camera body with M3x30 (i think) screw.
rest fits same as raspi cam.
**********************
raspi camera mount for prusa mk3.
mounts on a x motor carriage with M3 bolt (4th unused motor mount).
fully adjustable. Should be easy to print. and should fit printers with smaller build volume.
camera moves with x carriage and and since octolapse keeps bed in place for shots it gives cool effect of a growing model from a build plate.
If the camera mount gets in the way for maintanance work it just rotates 90 deg counter clockwise or you can just remove it by undoing the M3 bolt.
It should work with M3 bolts, spacers and nuts for all. For the movable joints lenght of 25-30mm and for camera case M3 16+ mm. For the motor mount part M3 but i don't know the lenght as i don't own the Prusa mk3.
*this is design for #PimpMyPrusa design challenge. i do not own prusa so i didn't test the design but i do have prototype on my other printer and it works. these parts were designed around the available mk3 prusa stl files.
0.2 layer height
at least 20% infill
orientate it so there's no need for supports, or minimal supports.
| Date published | 10/01/2019 |
| Tecnología | FDM |
| Complejidad | Fácil |
Pics of the actual camera case and prototype mount on cr10s