Pineapple Body scratcher
Pineapple Body scratcher
3D
Published 2017-09-11T15:24:42+00:00
This is the Pineapple Body scratcher. It's an attempt at a print and go solution to itch needs.
This allows one to not need any hardware or have to fit multiple pieces together.I call it the Pineapple Body Scratcher as the head shape reminds me of the shape of a pineapple.
This scratcher was not made merely for the back. It's angles can allow for a satisfyingly nice scratch through clothing. This can of course change as seen when changing nozzle size. In my test use the scratcher has not actually caused any scratching or breaking of the skin.
Overall printer size will depend on what size handle you can have.
The longer one should be 250mm tall, while the shorter one should be 160mm tall.
You can see my video on it here : https://www.youtube.com/watch?v=eOrPKEgy4Mo
For the smaller yellow one I printed it on my wanhao. I used a 0.4mm nozzle and I used 3 shell or 1.2mm shell thickness. My layer height was 0.2mm and the infill was 10%. On the orange one I printed it on my tronxy x3. I used a 1.2mm nozzle and printed it with 2 shells or a 2.4mm shell thickness. I used 5% infill and 0.6mm layer height.
| Date published | 11/09/2017 |
| Tecnología | FDM |
| Complejidad | Fácil |
| Sin apoyo | YES |