Red Dot Sight & Angled Foregrip 1/4 Scale
11,501
visitas
1,394
descargas
5
colecciones
3 comentarios
Cargando comentarios...
Red Dot Sight & Angled Foregrip 1/4 Scale
3D
Published 2018-12-08T20:42:11+00:00
113
3
Add to Collection
Descripción
For full screen, go to YouTube.
Detalles de impresión
This is the upgrade part of my recently uploaded M416.
Please take a look at my YouTube videos.
Since it is designed not to require a supports.
It is not necessary to post-process after output.
It is recommended to use PLA.
I used a 0.3mm nozzle.
Layer height is recommended 0.1mm.
If the nozzle you use is larger than 0.3mm,
If you enlarge the model, it will print well.
Because the model is detailed, it will look great even with larger outputs.
For correct assembly, please watch my youtube video.
Channel : https://www.youtube.com/c/CUBEBlueSky
Información técnica
Date published | 08/12/2018 |
Sin apoyo | YES |
Más información
Archivos
my print