Rock Climbing Hold - Crimpy Pinch
Rock Climbing Hold - Crimpy Pinch
Published 2015-11-17T16:55:00+00:00
A Crimpy, Pinchy hold for your home climbing walls.
The pictures show a slightly scaled down hold printed in a carbon/nylon filament but any filament can be used. It is best to lightly sand down the part after printing to remove the shine and provide a little more grip. This hold will work best on slabs/vertical/slightly overhanging walls.
It has been designed to take Countersunk M10 bolts and 5mm wood screws.
If you print in PLA please leave 72 hours between the end of printing and first use to allow the print to relax and attain its optimal strength.
Get in touch if you want any more sizes and I'll see what I can do.
I have had success printing with a layer height of 0.2mm, 4 perimeter shells and 40% rectilinear infill. If you try with any other settings please let me know how it turns out.
Date published | 17/11/2015 |
Cantidad de filamento | 80g |
Dimensiones | 118x87x31mm |
Tecnología | FDM |
Complejidad | Fácil |
Sin apoyo | YES |