Row Boat
$6.45 Row Boat
3D
Published 2021-11-24T10:04:01+00:00
A small row boat, the aim was to try and fit a party of four in the boat, but with a 1 inch base there doesn't seem to be enough space.
I've included a boat with no character slots (so it can be used as scenery), a boat with one character slot and one with two slots.
The bottom can be printed separately in the print variation, so the boat can lay flat on a flat surface.
I've also added a simple model of an oar so that it can print without any assembly or supports.
Included Items:
Base Geometry:
RowBoat
RowBoatOar
RowBoatOneSeater
RowBoatTwoSeater
PrintVariation1 FDM:
Each model split into pieces to be printed with FDM.
Requires Assembly
This is best printed on a flat print surface (not on a raft), this is so the models will glue together flat and seamlessly without gaps. A well leveled bed with a good thickness first layer is recommended for best results.
PrintVariation2 SLA:
Pre Supported
PrintVariation3 SLA:
Pre Supported
Additional Notes:
Flat bottoms
You can find more of my items at my website at www.tabletopminis.com
For updates, mini painting and printing you can also follow me on:
facebook: www.facebook.com/tabletopminis3dprints
instagram: www.instagram.com/tabletopminiatures
| Date published | 24/11/2021 |
| Precio | $6.45 |
