RS3: Research ship
RS3: Research ship
3D
Published 2015-06-26T07:56:57+00:00
A model of a universal research ship for FDM and other technologies. The ship can float, but if it is made of PLA filament and you fill it with water, it will sink. The draft is quite steady, you can compensate it by placing a load into the rear cargo area. The model has several individual parts which could be put together with the rest of the model or removed, so you can see inside the model. The ship contains an indoor harbor for submarine - it's not any error in stl file. The model has no real pattern, it is my own design.
It can be made by FDM technology, but there are quite lots of bridges. The model contains thin walls, so I recommend you to enlarge the model size as much as possible. It is better when the lines of the first layer are parallel to the direction of the ship movement. You can change color of the filament when printing individual parts to achiave a more realistic-looking model. You can print also the door parts, which can be used to close the holes between individual chambers.
| Date published | 26/06/2015 |
| Complejidad | Fácil |