Samsung Galaxy S5 Hard Case
Samsung Galaxy S5 Hard Case
3D
Published 2015-01-08T08:39:15+00:00
A hard case designed to fit the Samsung Galaxy S5. I designed this base for creating designer cases for a Samsung Galaxy S5 phone. I print my cases at 0.1 mm layer, Shell thickness 0.8, Bottom/ Top thickness 0.8 mm, With Supports, (ABS or PLA) Design samples that I have created using this model as the base are also supplied. Updates: 04/02/2014 - Shifted the locations of the power and volume button slots so they should be more centered on the buttons. Made the depth of the case a little shorter (i.e. from 11 mm to 10.95 mm). A Test print stl also included so that you can check the fit without wasting too much material. All Older .stl files can be found in the zip archive. 17/01/2014 - Uploaded two additional cases based on the base case. These two are also plain and hex patterned with the sides, top and bottom exposed for those who desire a minimalist type case. Giving total access to the power and volume buttons as well as removing the top edge that may interfere with user's ability to swipe.
Since I cannot find a way to update the .stls on this site a link to the updated models can be found at: updated stl
Geo case: Print at 0.2 mm layer height, with 10% infill. This uses 13 g of filament and takes 1 hour and 22 minutes. Hexagonal case: Print at 0.2 mm layer height, with 10% infill. This uses 13 g of filament and takes 1 hour and 14 minutes. Plain case: Print at 0.2 mm layer height, with 10% infill. This uses 19 g of filament and takes 1hour and 37 minutes.
| Date published | 08/01/2015 |
| ¿Cuándo tiempo lleva? | 60 - 70 minutos |
| Cantidad de filamento | 13g/19g |
| Dimensiones | 144mm x 77mm x 11mm |
| Complejidad | Fácil |
Came out well!