settler of catan interlocking tiles
settler of catan interlocking tiles
Published 2017-06-20T20:05:07+00:00
Here you find the interlocking tiles for the magnetic versions of:
- settlers of catan main game (http://www.thingiverse.com/thing:1238980)
- seafarers expansion (http://www.thingiverse.com/thing:1393862)
- cities & knights expansion (http://www.thingiverse.com/thing:1254404)
- traders & barbarians expansion (http://www.thingiverse.com/thing:853663)
- explorers & pirates expansions (http://www.thingiverse.com/thing:1588996)
- different scenarios & variants (http://www.thingiverse.com/thing:1410173)
IMPORTANT BEFORE PRINTING:
- That the interlocking does work well you have to print those pieces with support. After printing clean out the support structueres nicely. If not the pieces will lift at the sides when connected!
- If your printer doesn't have a heat bed, this print will hardly work. The interlocking only works if there is no warping of the tiles at all and if they're compleately flat
I also integrated the plain interlocking base in the files. It can be used to glue for example the tiles from JAWong (http://www.thingiverse.com/thing:26979) on top of it to get an interlocking version of the game.
Just print out the interlocking parts instead of the landscapes of the magnetic versions.
To build up the board, you have to start with the center piece and go around by adding the landscapes.
have fun :-)
BORDERS:http://www.thingiverse.com/thing:2133068
STORAGE FOR INTERLOCKING TILES: http://www.thingiverse.com/thing:2084410
Printer brand : Ultimaker
Printer : Ultimaker 2
Rafts : No
Supports : Yes
Resolution : 0.4 mm
Infill : 20%
Notes : I recomend to use supports for the tiles
Date published | 20/06/2017 |
Tecnología | FDM |
Complejidad | Fácil |