Smart - Card Holder
2,529
visitas
121
descargas
1
colección
0 comentarios
Cargando comentarios...
Smart - Card Holder
3D
Published 2019-06-17T20:13:17+00:00
18
0
Add to Collection
Descripción
This is a very smart Card Holder that will hold up to 8 cards. It's a assembly of three parts. One front part, one back part and one part that will push your cards out.
Beyond These parts you will need three rubber bands, as seen on the pictures.
All your cards will sit safely within the holder but with one motion all the cards will be easily accessible. When you pull the card pusher all cards will rise with a form as a staircase.
I use this everyday and works great everytime!
Hope you guys like it
Licencia
Detalles de impresión
For the printing i would go for 0,2mm in layer height and 15% infill or more.
After the print is finished i suggest to use sandpaper where the cards will slide up and down.
Información técnica
Date published | 17/06/2019 |
¿Cuándo tiempo lleva? | 170 - 171 minutos |
Cantidad de filamento | 35 grams |
Dimensiones | 62mm x 100mm x 11mm |
Sin apoyo | YES |
Más información
Archivos