Snap-Fit Passenger Airplane 787-8
Snap-Fit Passenger Airplane 787-8
Published 2017-07-10T17:09:14+00:00
A snap-fit model of a modern passenger airliner. I designed this model using online available blueprints to provide a quality print of one of the newest aircraft produced, the Boeing 787-8. To get the -9 version with a much more detailed design as well as engines and a better stand, head over to https://cults3d.com/en/users/Efren12/creations . The wings in this model are bent upwards replicating flight conditions the real aircraft encounters in flight. (Control Surfaces are included, as well as fuselage windows)
Head over to https://cults3d.com/en/users/Efren12/creations for more of my creations.
Enjoy!
This model is optimized for 0.1 mm layer height as well as a conventional 0.4 mm nozzle.
The engine is the the only part that absolutely needs support.
The wing can benefit from support material but can very well be printed without any.
For all of the parts of the airplane I recommend 0% infill and 2 shells.
When you have all the parts printed, start by assembling the tail section (aft fuselage section with the stabilizers). Put one of the flexed wings into the tail section and then assemble the nose fuselage with the connector and the other wing. Finally insert the stand into the hole at the rear fuselage section.
Date published | 10/07/2017 |
¿Cuándo tiempo lleva? | 1200 - 1800 minutos |
Dimensiones | 25cmx27cm |
Tecnología | FDM |
This is a great design. After print and assembly, I used white wood fill putty to fill the gaps between the sections. I covered the model with XTC-3D to smooth it out and then painted it with spray enamel.