sprinkler
11,523
visitas
1,146
descargas
11
colecciones
0 comentarios
Cargando comentarios... 
sprinkler
3D
Published 2018-06-29T16:57:49+00:00
99
0
Add to Collection
Descripción
This is a 3d printed sprinkler for good Garden Irrigation.
It has a spray angle of ~180°
You can connect one or two 13mm hoses.
I connected the "Gound_holder" with 2 random screws but the holes are 3mm. You need to be carful because they brake fast, but not because of the water pressure.
Updated the "Gound_holder", "Gound_holder_v2" is stronger and will not brack as fast.
This object was made in Tinkercad. https://www.tinkercad.com/things/hefm9j6IOPF
Detalles de impresión
Speed: 35mm/s
Resolution: 0.3mm
Temp: 205° Nozzle 65°Bed
I used PLA
I printed with no support and it works good.
Información técnica
| Date published | 29/06/2018 |
| ¿Cuándo tiempo lleva? | 30 - 60 minutos |
| Cantidad de filamento | 15g |
| Dimensiones | 20mm x 56mm x70mm |
| Sin apoyo | YES |
Más información
Archivos