Stewart platform
Stewart platform
3D
Published 2023-01-04T16:52:29+00:00
A model of a Steward platform or a Hexapode.
Watch it in Action (https://youtu.be/gH8y91gmtwc).
You can choose which Base you wanna use. In this Pictures i've used the small and the big one but because the interfaces are identical you can use whichever you want. In the Comunity Print section you can see Pictures where i've used the middleBase as Top and as Bottom.
Size in this configuration 150x125x85mm.
Additional you will need:
6x Screw M3x15
6x Screw M3x25
6x Screw M3x35
18x Hexagon Nut M3
The Screws can always be longer. They can also be replaced with some Filament or something simular however, this can fall out when moving, which can reduce the fun of the model.
You will have to Print
2x Base (size can be chosen by you)
6x Cylinder
6x Piston
6x jointbottom
6x jointtop
If you orientate everything correctly you can print without support.
Because my Printer isn't the best i had to do some sanding so everything moves smooth.
| Date published | 04/01/2023 |
| Dimensiones | 150x125x85mm |
| Sin apoyo | YES |
Here the same Model with the middle Base as Top and as Bottom