The Phone Lounge
$3.90 The Phone Lounge
Published 2021-08-25T13:47:22+00:00
My wonderful Patreon supporters get this model free! :)
Presenting... The Phone Lounge! It's a large, fold-up phone (or tablet) stand with a cable stash compartment and adjustable reclining angle! The whole thing is a print-in-place, support-free design that's ready to go right off the build plate thanks to the wonders of vertical hinges!
It's a big stand, too, at 100mm across, so nice and stable for large devices.
Read the original Patreon writeup here:
https://www.patreon.com/posts/55322955
Since this is an articulated model, you'll want to make sure you don't have any printing issues such as stringing or overextrusion that might bind moving parts together!
I used 0.2mm layers (which I almost always do) and that worked well. If for some reason you're inclined to use thinner layers, be aware that you'll probably run into some overhang issues at the top of the slots that cut through the panels. That wouldn't affect the functionality, of course, but it'll need a bit of a clean up. Printing at 0.2mm seems to be sufficient to avoid that problem, though.
Date published | 25/08/2021 |
Precio | $3.90 |
Sin apoyo | YES |
Print it in original with .2mm, the scale up wide side to 120mm with .3mm. It came out good. Love the design