The TESSERACT from the Avengers movies
The TESSERACT from the Avengers movies
3D
Published 2019-09-17T09:58:54+00:00
The TESSERACT from the Avengers movies
Aka The Infinity Space Stone
Here is my take on the Tesseract from the Marvel movies. (MCU)
You can watch how I made my own version of this Tesseract prop on YouTube: PropsNstuff
Only the num pad and the fan part need support. (Because of the magnet inserts)
All the other parts print perfectly without supports
If you are looking to make this. I would suggest using a hole lot of M2 screws. Not as a part of the construction, but to get the right look.
I used the fan part as a way to get to the battery’s. So it has an insert for to 10mmX2mm magnets. That means you will need 4 magnets in total.
As if you haven’t guessed it. This is fan made by me. Whom is a huge Marvel fan. And not to be associated wit the real thing.
If youre looking to make this? Let me know how it turns out. Have fun and best of luck:)
Suggested parts you will need:
4 magnets (10mmX2mm)
40-60 ich..M2 Screws
And of course you will ned a briefcase and some lights
Check out the video, and you will get a better picture of what you will need;)
| Date published | 17/09/2019 |