Toilet Paper Holder 3D Print (Mimic Industrial Pipe)
Toilet Paper Holder 3D Print (Mimic Industrial Pipe)
Published 2019-07-10T17:23:51+00:00
Description:
- Designed to fit print bed (110mm X 110mm X 110mm)
- Minimal support needed
- Meant to mimic Industrial Pipe (Black Iron Pipe)
- Custom 45° angle Threads to reduce needed support
Instructions:
- 1 Waste Nut, 2 2" Pipe, 2 90° Elbows, 1 6" Pipe, and 1 End Cap
- First Spray paint with textured paint to hide layer lines
- Second paint with a metallic paint of your choice
Hardware Not included.
*Note:
- I had to print the 6" pipe on a 45° angle wrt XY plane and 45° angle wrt XZ plane, and with no skirt, brim or raft. (Print bed 110 cubic mm)
- The 90's only need scafolding from build plate.
If you have any questions PM me and I'll try to answer as soon as posible,
Thanks.
Date published | 10/07/2019 |
It's pretty hard to assemble :( i broke the 90º... Can i resize the pipes 1mm down? or should riseze the connectors 1mm up?