Tronxy P802 Anti-Z wobble
Tronxy P802 Anti-Z wobble
3D
Published 2017-03-15T13:54:44+00:00
NOT compatible with the round fan shroud! However the Mistral 2.1 works perfectly.
Made a stabalizer for the Tronxy P802 z-Axis. You can use any 608 bearing you want. The fit is 0,3mm wider, so it should be easy to assemble.
I would recommend using sealed bearings instead of the shown shielded.
https://www.banggood.com/custlink/GGGEkmvZqA
https://s.click.aliexpress.com/e/_AUUgKJ
Update V2: More stable due to inner 45° angle. Cut outs for the outer screws. (on the wrong side...), spacers to fit the longer screws provided with the printer
Update V3: Proper cut outs (chamfer) for the outer screws. Raised the spacers for the screws a bit. Chamfers for easier insert of the bearing and rod.
Assembly instruction:
Dimensions:
Distance leadscrew - rod: 17mm
Distance screw holes: 31mm
Tolerances: 0,3mm
If you need other dimensions write me a message.
| Date published | 15/03/2017 |
| ¿Cuándo tiempo lleva? | - 60 minutos |
| Dimensiones | 50,3mmx44,2mmx42,4 |
| Tecnología | FDM |