Wacky Puzzle Cube
1,574
visitas
50
descargas
2
colecciones
0 comentarios
Cargando comentarios...
Wacky Puzzle Cube
3D
Published 2018-06-17T18:12:37+00:00
3
0
Add to Collection
Descripción
This puzzle cube is in 4 parts. Its most unique feature is the shape of the cuts that allow this cube to be assembled and disassembled. There are 0.3mm tolerances between the faces.
(about 2x2x2 inches)
Detalles de impresión
Make sure the flat faces are on the print bed. Orient the pieces so that there are no overhangs greater than about 45 degrees. I printed mine with a 0.15mm layer height, no supports, rafts, or brims, infill 10% with two bottom layers, two top layers, and two perimeters. I was able to print it in about 6 hours.
Información técnica
Date published | 17/06/2018 |
¿Cuándo tiempo lleva? | 320 - 400 minutos |
Cantidad de filamento | 50g |
Dimensiones | 50mm x 50mm x 50mm |
Sin apoyo | YES |
Más información
Archivos