Wallmount for Longboards
Wallmount for Longboards
3D
Published 2018-06-20T11:12:14+00:00
This wall mount for longboards was designed so your longboard wheels won't touch the wall when the board is hanging. You can hang your board with the deck side towards the wall so the wheels point into the room and the bottom of your deck is visible.
You will need to print the file two times so you have one hanger for each of the front wheels. The file has to be printed with some minimal support so the screw slots print nicely.
Once you have printed the hangers you have to screw 4 screws into the wall so you can slide on the hanger. Screw them in such a way that there is 2mm between the head and the wall and the holder should slide in with some resistance.
Print with some support inside the screw slots so they turn out alright.
I printed it at 35% infill and that is more than enough to hold my board. Print with more or less infill if you have a heavy or very light board.
| Date published | 20/06/2018 |
| Cantidad de filamento | 50g for one side 100g total |
| Dimensiones | 137, 130, 25 |
Thanks for this idea! I like it so much