Watch And Bracelet Stand - Convenient / Adjustable / Space Saving
Watch And Bracelet Stand - Convenient / Adjustable / Space Saving
3D
Published 2017-03-20T19:16:28+00:00
This provides a convenient, smart looking and space saving solution to hold and display your watches and bracelets. Straight forward prints... worth the time and filament. Handy to use yourself... and great as a unique gift.
Choose the stand you want to hold / display 1 / 2 / 3 watches or bracelets vertically. There is also an option to have the stands upright on the left or right hand side.
This lets you configure the stand to suit your needs. For example, f you want to display six bracelets, print a Left Triple Stand and Right Triple Stand and place them side by side so the uprights are in the centre positioned beside each other.
There are also "TALL" file versions provided for people with chunky watches. You won't need this version for most regular dress watches. The TALL version increases the spacing between levels by 10mm to allow for the thicker/larger watch body,.
Each stand has 5 adjustment slots. Each slot increases the length of the stand by approximately 6mm. In addition, there are two different length adjuster files provided. The 'Long' version is approximately 9mm longer than the short one... so equal to 1 1/2 slots. This lets you get the length just right to suit almost any watch strap or bracelet.
What you need to print:
Choose the stand of choice from 1 / 2 / 3 positions and left or right access then print the appropriate number of adjusters to suit.
Please view all the images for additional information and read the print settings.... and please post photos of your stands in use!
Note: If you like this check out all my other practical and fun designs
Printed in PLA using 2 shells and 20% infill should be sufficiently strong. If you want to increase the strength and rigidity add an extra shell and/or increase the infill to 30%. This shouldn't be necessary on most machines. They print great on my Replicator 2 / 5th Generation Replicator.
Raft is recommended.... just break it away and they should be ready to use.
The adjusters should slide snuggly into the required slot to suit your watches and/or bracelets.
| Date published | 20/03/2017 |
| Tecnología | FDM |