[WIP] 75mm grodan cube cover w/ watering holes
5,648
visitas
104
descargas
2
colecciones
1 comentarios
Cargando comentarios...
[WIP] 75mm grodan cube cover w/ watering holes
3D
Published 2018-02-23T11:45:07+00:00
21
1
Add to Collection
Descripción
This is a [Work in Progress] cap to cover the 75mm grodan stonewool blocks.
Features:
-aims to disperse water semi-evenly into the block.
-should prevent algae growth.
-should help to keep the moisture inside the block and lessen transpiration directly from the wet medium.
-6 mm hole for temp sensor
Details:
-wasn't printed yet, will be in a few days
-Dimensions(LxWxH)[mm]: 75x75x15
-Hole sizes: watering holes are 2mm, the opening for the tubing is 10mm
-the slide in opening for the stem is 10mm
This model will likely be revised several times, and is foremost a prototype, if you print it and have any problems/suggestions fell free to contact me
Detalles de impresión
none
Información técnica
Date published | 23/02/2018 |
¿Cuándo tiempo lleva? | 120 - 150 minutos |
Cantidad de filamento | 31 grams |
Dimensiones | 75x75x15 |
Tecnología | FDM |
Complejidad | Fácil |
Sin apoyo | YES |
Más información
Archivos