WYZE portable powerbank support magnetic or hang
WYZE portable powerbank support magnetic or hang
Published 2019-10-13T21:55:11+00:00
I created this object to be able to use my wyze cam v2 at the front door where I have no power outlets. My door is steel and I can mount the wyze cam on one side with the magnetic base to look at my front porch, and keep a battery pack in this magnetic case inside the house. I put a keyhole to hang it by with a screw or nail if you don't have a steel door or the correct magnets for the model. One charge of my 10000mah battery will last about 2 days and my 15000 one will last around 2-3 days. I usually only use that one if I'm expecting a package to arrive and I wont be home.
The box inside dimensions are (25.8mm deep x 96mm wide x 66mm tall)
I searched online if magnets would adversely affect the battery packs and found nothing saying it would, also I've been using it without any issues. If you are concerned about that, hang it by a screw ;)
The magnets are from aliexpress, they are 15mm by 2mm and slide perfectly into the 3 tracks in the model. I used 10 for a very strong hold, but ymmv so have a bunch on hand if you're using magnets. You can push them all the way out the other side if you put too many in or just want to remove them.
I am uploading it for the #wildxwyze contest and for all to enjoy!
@wildrosebuilds @wyze @myminifactory
I designed this in Fusion 360, printed it with PLA.
.4mm nozzle on a Prusa MK3S
.2mm layer height and 15% infill
no supports or brims or anything
took 5.5 hrs to print, but my settings are pretty slow
Date published | 13/10/2019 |
Cantidad de filamento | 59g |
Sin apoyo | YES |