X-Wing Pilot Chest Box
X-Wing Pilot Chest Box
Published 2021-10-18T15:24:22+00:00
You need:
1 Body (Gray)
1 Rear Cover (Gray)
1 Inset Plate (Black)
3 Buttons (2 Blue, 3 White)
2 Switches (White)
3 Switch Retainers (Any Color)
1 Jack (Silver)
1 Knob (Silver)
1 Switch OR Alternate Switch (Gray)
4 #8 x 3/8" OR M4 x 8mm Type B Plastic Screws
3 Small Zip Ties (~4")
I've decided that snaps were a dumb way to do this (although the original version is still available here) & redesigned it from scratch using crush ribs & zip ties for the hose. It should still assemble without too much fuss, although I'd recommend a small dab of superglue on each piece as you assemble it, just to be on the safe side.
Many thanks to Pfalter for their guidance in revising the new design to be closer to screen-accurate. :)
Date published | 18/10/2021 |