adamwalczak's Print of Star Trek Adventures - Print at Home - TNG Bridge Crew: Jean-Luc Picard
261
visitas
0 comentarios
Cargando comentarios...
Community Print Impresión 3D de Star Trek Adventures - Print at Home - TNG Bridge Crew: Jean-Luc Picard
Published 2024-01-04T19:47:59+00:00
2
0
Impreso con: BIQU b1
Material: PETG
Descripción
Printer - BIQU B1.
Material - PTEG (standard).
Material temperature - 225 degrees C.
Table temperature - 70 degrees C.
Print speed - 60%.
Covered printer - casing.
Cooling - 100% without the first layer.
Printed horizontally. The model was placed.
Supports on the entire rear surface.
Parallel supports, 2 mm spacing.
Connecting layer 3 - heavy.
Distance in the X,Y axis - 0.8 mm.
Polished with a nail grinder.
Sanded with sandpaper.
Grooving removed from the base.
600% scaling factor.
PL
Drukarka - BIQU B1.
Materiał - PTEG (standart).
Temperatura materiału - 225 stopni C.
Temperatura stołu - 70 stopni C.
Prędkość druku - 60%.
Drukarka osłonięta - obudowa.
Chłodzenie - 100% bez pierwszej warstwy.
Wydrukowano w poziomie. Model był położony.
Podpory na całej tylnej powierzchni.
Podpory równoległe, odstęp 2 mm.
Warstwa łącząca 3 - ciężka.
Odstaęp w osi X,Y - 0.8 mm.
Szlifowany szlifierką do paznokci.
Szlifowany papierem ściernym.
Usunięto ryflowanie z podstawki.
Współczynnik skalowania 600%.
diary - supplement :)
The painted figure on the left is printed in 4 parts.
The unpainted figure is the same as in the other photos.
I also designed the barrel as a decoration.
I adjusted everything to scale.
Kpitan painted with three layers of acrylic and water-based paints.
Glued with PATEX Crystal ALL in ONE glue.