Box (Container) for Calibration Weights
Box (Container) for Calibration Weights
3D
Published 2019-10-14T15:57:22+00:00
This is a box (container) for this calibration weights set: https://smile.amazon.com/gp/product/B07B8J19DM/ which includes 1g, 2g, 5g, 10g, 20g, 50g, and 100g weights + metal tweezers.
It includes a space for the tweezers and should store the weights in a relatively dust-free environment for long-term storage (I mean, how often do we need these things? haha).
It does use more plastic than I'd hoped but it's only about a dollar's worth and still cheaper and faster than ordering a more expensive (and not quite as high quality) set of calibration weights that *does* come with a box =)
For the hinge just cut off a bit of filament (PETG works best but PLA is fine) and heat (NOT "melt") the end for like one second with a lighter then flatten (squash) it against something, well, flat. Then shove it through the hinge holes and do the same on the other side. I used a little piece of metal but you can use a screwdriver, pliers, flush cutters, etc. Anything metal that's got a flat side will work. Just be careful with the lighter when heating the end that's already been placed through the hinge--don't want to melt the box!
I also used a Sharpie to color the text on the side and I highly recommend you do the same because it makes it easier to read from across the room when it's sitting on your shelf.
| Date de publication | 14/10/2019 |
| Sans support | YES |