Cleopatra Articulated Doll
Cleopatra Articulated Doll
3D
Published 2015-07-23T12:38:24+00:00
A Cleopatra edition of the articulated figure. Comes with accessories perfect to print in flexible filament, and print-in-place support free body parts with articulation, awesome!
Cleopatra VII was the last ruler of the Ptolemaic dynasty, ruling Egypt from 51 BC - 30 BC. She is celebrated for her beauty and her love affairs with the Roman warlords Julius Caesar and Mark Antony.
Want to create your own figure / doll? Download the original base mesh, import to your favourite design software (e.g zbrush), customise! Once your happy with your design, upload it to the site for others to check out!
Post process painting done by Pallavi Dave.
This entire design prints totally support free! Out recommended settings - Head (hi-res) - Crank up the layer height it its best resolution, with support off - 0.10mm layer height 10% infill This take 1 hour 50 minutes to print, and uses 9g of filament. Bangles and clothing - for the accessories we 100% recommend using a flexible filament (e.g ninjaflex, filaflex, etc etc), print in the orientation the STL's are supplied in for easy support free printing and follow your 3D printer manufacturers recommended settings for that filament, e.g for the makerbot using flexible filament, the settings we used were - 0.20mm layer height 10% infill Support and raft off This takes 6 hours and 18 minutes and uses 75g of flexible filament in total. Print in place upper and lower body - Using PLA or ABS set your printer to 0.20mm layer height, 10% infill, and support off! Both parts will fit on most print beds at the same time, and with the afforementioned settings will take to 7 hours 15 minutes to print and use 70g of filament in total :-D
| Date de publication | 23/07/2015 |
| Durée d’impression | 480 - 525 minutes |
| Quantité de filament | 155g |
| Complexité | Medium |
| Sans support | YES |