Climbing Hold Round
Climbing Hold Round
3D
Published 2014-10-17T15:34:43+00:00
Create your own custom challenges with this abstract style climbing hold. This difficult grade climbing hold can help you improve your climbing skills and endurance. Print as many as you need to produce your personalised climbing wall.
Scale it up or down to really personalise your wall and create your own challenges in the world of climbing.
Please note! Ensure there is at least 75% Infill on this product if being used for a climbing wall. Test the product at a low height before moving up as printer qualities tend to vary. For best results, print in Carbon fiber based filament.
Printed using single extrusion PLA. 0.2mm Layer Height. 75% Infill. This uses around 115g of filament and takes about 8 Hours to print. Please note, you will need a T Bolt to fix it to a wall (unless using for display purposes) For best results, print in Carbon Fiber. Always remember to test at a low height as printer qualities may vary.
| Date de publication | 17/10/2014 |
| Durée d’impression | 400 - 480 minutes |
| Quantité de filament | 115 |
| Dimensions | 115 x 115 x 20 |
| Complexité | Easy |
