Popplio - Pokemon Sun & Moon Water Starter
Popplio - Pokemon Sun & Moon Water Starter
3D
Published 2016-05-31T11:28:14+00:00
It's finally time for the 3rd and final Pokemon Sun & Moon Starter. This is the Water Type Popplio. I created this model in Fusion 360 using the sculpting tools in there. Then I added the details using sketches. It took about 4 hours to model and another 7 to print.
Print Settings:
Printer: Robo 3D R1
Filament: Hatchbox White PLA
Layer Height: 0.1mm
Infill: 20%
Supports: Yes
Raft: Yes
Post Processing:
Step 1: Remove all supports and clean up any rough areas with sand paper or a file.
Step 2: Apply a primer. We used automotive fill primer to help fill in the print lines as much as possible.
Step 3: Paint it! We used water based acrylic paints with a paintbrush to apply the paint. Start with the blue on the body then move to the smaller details.
Step 4: Let dry and enjoy!
I hope you like this. Let me know what you think. :)
| Date de publication | 31/05/2016 |
| Technologie | FDM |
