Samsung micro USB guard
11,176
views
2,186
downloads
12
collections
Community Prints
Add your picture
Soyez le premier à partager une photo de l'impression de cet objet
1 comments
Loading comments...
Samsung micro USB guard
3D
Published 2018-03-08T11:42:47+00:00
532
1
Add to Collection
Description
My cable was falling apart so I decided to make a ''CableGuard'' for my phone charger.
This a samsung (micro USB) version off the ''iCableGuards'' from Sergio Romero. If you have an Iphone, then check out his design:
(https://www.myminifactory.com/object/3d-print-21235)
Détail de l'impression
Print with the cylinder down, otherwise there is a chance that your cable will not fit. You might have to lower the print speed or use supports if the results are bad. If the tube is too small and the end of the tube is cutting into your cable, use V2. Otherwise it will not protect your cable but it will damage it instead. (In generalI recommend using the stl file V2).
Technical Information
Date de publication | 08/03/2018 |
Durée d’impression | 15 - 20 minutes |
Quantité de filament | 1g, ~0,5m |
Dimensions | 15,8mm x 8,3mm x 33mm |
Technologie | FDM |
Complexité | Easy |
Sans support | YES |
More Information
Object Parts