The Sleeper Simulant from Destiny
The Sleeper Simulant from Destiny
3D
Published 2015-10-13T15:14:57+00:00
So this is one of the most detailed and intricate model I have made. When I first saw the art for this I decided to challenge myself to building this. With a lot of detail and size it stands out amongst all the models I have created.
The sleeper simulant is one of the latest weapon types in destiny. It’s unique in that it’s the only fusion heavy weapon. The quest to obtain this requires certain mission to be active and is a tricky one to get unless you work together.
Because of the angles in this model I had to build custom support which I have designed to snap off. Also turn on support to help in these other areas. Make sure your support threshold is set to 45 degrees.
for the yellow and blue wires you could use wire or cable. i used scrap filament.
(PLEASE: Do not sell or upload on any other websites without my permission.
I will really appreciate if you tag me and credit me.
Thank you in advance for your support)
This model was printed at 0.2mm per layer and 10 % infill. use support material and i have made a custom support system for the squares going down the side. Running down the body are tubes to house 4.8mm metal rods to increase strength. the magazine has space for the same rods to help with alignment on the magazine.
| Date de publication | 13/10/2015 |
| Technologie | FDM |
| Complexité | Difficult |
Total of 92 print hours- I used steel rods to help stiffen and align the pieces. Printed by Itchy Pig Creations