Apex Legends PeaceKeeper Shotgun (Oversized)
Apex Legends PeaceKeeper Shotgun (Oversized)
3D
Published 2019-03-15T19:42:06+00:00
Okay, So this 21 piece monstrosity is my take on the Peacekeeper from Apex legends drawn from a picture canvas in Fusion 360.
its been sliced to fit most print build volumes. all of the parts were printed on my Prusa I3 Mk3. there are pegs on just about every part to help with putting the thing together. I used 3D Gloop to fuse all of the part together and the bonds are strong.
The Lever and Receiver are not static parts they both move a little bit. There are 4 holes on both the receiver and the trigger intended to hold 8x3mm magents which did not hold the two parts together as well as I had intended.
Full Disclosure this thing is absolutly massive! its over 3 and a half feet long, I printed it fairly solid at 20% infill and it took a total of 209 Hours and 2.5 Spools worth of filament. If you're not a crazy person like I am, I'd highly reccomend printing this at 75% scale. everything should scale down fine except for the magnet holes. I can upload a 75% version of it if enough people ask for it.
Also included is the full model as a single STL. I dont know of any printer that can handle that, but scale it down to around 20-30 percent if you just want a single piece desk model or what ever.
Happy Printing Y'all!
| Date published | 15/03/2019 |