CD-drive case
CD-drive case
3D
Published 2018-01-03T17:33:09+00:00
Do you miss a cd-drive in your laptop? Do you have an old laptop hanging around somewhere? If you do it maybe has a cd drive that you can reuse. I made a case for these drives. One has a screw on top and the other one can be glued on or friction welded. For the screw on model you will need 7 M3 screws (length up to 150mm). An adapter is also needed to connect the cd drive to a computer or laptop. I found one on aliexpress.
Adapter:https://www.aliexpress.com/item/USB-to-SATA-Laptop-CD-ROM-Cable-USB-2-0-to-7-6-13Pin-Slimline-SATA/32745145746.html?ws_ab_test=searchweb0_0,searchweb201602_1_10152_10065_10151_10068_10304_10307_10137_10060_10302_10155_10154_10333_10056_10334_10335_10055_10054_10059_10332_100031_10099_10103_10102_10052_10053_10142_10107_10050_10051_10326_10084_10083_10080_10082_10081_10177_10110_10111_10112_10113_10114_10312_10313_10314_10315_10078_10079_10073,searchweb201603_18,ppcSwitch_5&btsid=9ccdced3-9853-415b-9a09-2b08edbf09cf&algo_expid=3a460bea-5380-4117-94a2-0dfd1a2e89cd-28&algo_pvid=3a460bea-5380-4117-94a2-0dfd1a2e89cd&transAbTest=ae803_1
This one is printed on a prusa i3 MK2S
Material: Doesn't matter
Quality: 0.2 - 0.1 mm
Supports: no
Brim/raft: no
| Date published | 03/01/2018 |
| Tecnologia | FDM |
| Complessità | Easy |
| Supporto Gratuito | YES |