Devil Skull & Eagle Smoothed (No Logo)
Devil Skull & Eagle Smoothed (No Logo)
3D
Published 2019-07-15T14:02:13+00:00
I removed the front-top logo from the original model as I would like to display this somewhere and not have an advertisement on it. Smoothed the top to remove the logo and that's about it. Enjoy!
My upload on thingiverse which shows the original remixed object.
My main page is on thingiverse, but seeing as I used both services, I figured I'd upload here too! Check out my thingiverse page!: https://www.thingiverse.com/AnOgre/about
The pictured model is scaled down to test if a small version would still be detailed enough to print, so I used a 0.12mm profile at 50mm/s and this is the result! I think it printed beautifully and using Cura's support structures with 5% Gyroid infill and 1 wall line, the supports held up fantastically and removed very easily with little residue on the model! Print took 10.5 hours to print due to quality settings but I'm very pleased with the result!
| Date published | 15/07/2019 |
