Goldeneye 007 Remote Mine
Goldeneye 007 Remote Mine
Published 2014-07-22T18:00:07+00:00
The year is 1997. The game, Goldeneye 64. The weapon, The Remote Mine.
Now is your chance to build your very own Remote Mine prop from Goldeneye 007!
Download the printable parts now from myminifactory, and then follow this guide from designer Shane Blomberg to construct it! Kapow!
Note that I have included .STL files, GCODE files, and .X3G files as well. So not only will you have the raw data, but can use the EXACT settings I used to print mine. I have also included a .IGES of the whole thing put together, just incase you need some more instruction on what goes where. Battery hatch: - Print lying flat, without support or raft, this will ensure the snap feature works - 0.20mm, 10% infill, 22 min print time, 4g filament Lower Housing: - Doesn't need raft or support, though it may warp without raft - 0.20mm, 10% infill, 5 hour 11 min print time, 63g filament Upper Housing: - Needs support - 0.20mm, 10% infill, 6 hours 46 min print time, 86g filament. Both of the textured pads: - need support - 0.20mm 10% infill, 20 min print time, 4g filament (each)
Date published | 22/07/2014 |
Complessità | Difficult |
easy to print, and the soldering of the circuit board wasn't hard, just took some time.