The Keep on the Borderlands
The Keep on the Borderlands
3D
Published 2016-07-05T09:46:51+00:00
Versions of Keep on the Borderland
b2 - as described in the module
b2_backcover is modified to be the same as the back cover of B2
Source files @ https://www.tinkercad.com/things/kObqeYOYhVB-keep-on-the-borderland-b2-backcover/
the reason why there is 2 diff colour of filament is because while im printing then i notice my hips filament is running out so i try mixing with glow in the dark abs since the temperature is very similar and to my surprise it works... i did not expected that it print quite well... Post process: to be honest i did not do any post process cause i printing this model too small and if i remove the support it might break the model. Print Settings: Printer: flashforge dreamer Filament: PLA Layer Height: 0.2 mm temperature extruder: 240 temperature bed: 105 Shell: 2 Infill: 5% Supports: yes Raft: yes software/slicer: flashprint
| Date published | 05/07/2016 |
| Tempo per farlo | 170 - 187 Minuti |
| Quantità di filamento | 80.18 |
| Dimensioni | 142.83mm x 99.33mm x 23.05 |
| Tecnologia | FDM |