Hex Speaker (Mono)
Hex Speaker (Mono)
3D
Published 2014-10-07T14:13:05+00:00
This speaker is designed to print completely without support, rafting or brim. This enclosure is designed specifically for the Mono Amplifier kit from Kitronik - You can purchase one here. The speaker slots into some mounting grips and can be secured with hot glue for better audio quality and to prevent case vibration. The face plate and back plate are push-fit so require no glue.
Paint it in any colour combination you choose!
_________________________________________________________________________
If you purchase this object through the MyMiniFactory Store please note:
-
This product will come unassembled and unpainted when you buy it. We encourage you to be creative, personalize it as you wish. Express your awesomeness and share a picture of the final result with us!
-
Unless you have a particular request, the colour of your print will be chosen at random and will be printed in either ABS or PLA filament.
-
Delivery time will be between 1 and 4 weeks from the moment you order the object. This is dependent on your location and the length of time the object takes to print.
-
Email info@myminifactory.com if you would like any further information or if you have any special requests.
-
Sometimes orders will be printed live on MyMiniFactory TV - check it out here.
_________________________________________________________________________
Printed without supports or raft at 0.2MM Resolution with 15% Infill. This took 9 Hours 30 Minutes. The use of the Joining Ring is optional and only viable if you have a very accurate printer with good resolution. The Face and SpeakerMount parts were glued together with Araldite. The parts were lightly sanded and de-burred with a small file. Parts were sprayed with 3 light coats of Acrylic aerosol paint.
| Date published | 07/10/2014 |
| Tempo per farlo | 570 - 600 Minuti |
| Quantità di filamento | 115g |
| Dimensioni | 95MM x 95MM x 90MM |
| Complessità | Easy |
| Supporto Gratuito | YES |