LCD HOOD SHADE
LCD HOOD SHADE
3D
Published 2018-01-15T15:05:35+00:00
Hood/Sun shade for the fold-out LCD screen of a Canon SX50HS or similar camera.
The hood is held onto the screen with a rubber band.
The hood is two pieces: a frame and the shade. The pices are glued together (you can see the glue in the pictures)
The screen on my Canon SC50HS measures approximatly 76mm x 55mm. If you camera has similar dimensions, it should fit fine, or you could resize the pieces to fit your exact camera. The LCD portion of the fold-out screen is off-center, and the viewport in the frame is similarly off-center.
After the glue is finished curing, I will paint the entire assembly flat black.
Update History
2018Jan20: Added new .stl file screen_hood1B.stl
- Removed the screen mock-up that the frame was built around from the .stl file.
- Repositioned the knobs - they weren't all the same distance from the edges (now they are)
| Date published | 15/01/2018 |
| Tempo per farlo | 7 - 8 Minuti |
| Quantità di filamento | 33 |
| Dimensioni | 76mm x 55mm x 50mm |