Rotating K-Cup Holder for Keurig or Similar Coffee Machines
Rotating K-Cup Holder for Keurig or Similar Coffee Machines
3D
Published 2018-01-22T11:07:48+00:00
Are you tired of your lame old K-Cups sitting around in piles or in their boxes, mocking you with their disorganized chaos? No? Well, I've got something for you anyway! This rotating K-Cup Organizer is designed to hold up to 16 Keurig K-Cups or similar coffee pods. Designed to be compact to fit on countertops, tables, or (If you're like me) the top of a minifridge (#collegelife).
For a full print of this object, you'll need to print:
- 1 x Center Spool
- 1 x Main Platform
- 1 x Main Platform Mirrored
- 4 x Support Column
- 1 x Spacer (Optional)
The All Parts file should help give an idea of how all the parts are meant to be assembled. The optional Spacer is useful if you want to increase the distance from the base to the first platform. If you want to increase the distance between platforms, I would recommend altering the dimensions of the support columns separating the two platforms.
The design is still a little rough and it might go through a few edits before I consider it a finished project. But for now, it's functional! If you're some awesome person who wants to edit or remix this design to make it prettier, bigger, or just better, then I fully encourage you to go for it! Now if only someone would redesign it to use one of these pesky extra 608 bearings that I have lying around.....
Anyway, as always, this print is 100% free to use for commercial purposes if you so wish. You can download, remix, redesign, edit, print, smash with a hammer, or generally do anything you'd like with this design.
If you like my designs and want to help fund the legal fees from the impending Keurig copyright lawsuits, then consider dropping a tip!
Also, if you read through all of that, you're awesome.
Thanks,
_____________
RhysSwitzer
All parts of this design are fully 3D printable without supports.
I do recommend superglue-ing the parts together as there is a bit of intentional wiggle room in the design.
You can go as low as 10% infill on this design, however, I do recommend a higher infill in order to add a bit more weight and stability to the overall product.
All the parts pictured were printed at 0.3mm layer heights. It was functionality over beauty here, and I probably saved upwards of five hours in total print time by going with 0.3mm instead of 0.1 or 0.2.
I printed this with PLA, as I did not anticipate any of the parts undergoing much stress, but ABS should work just fine if you're concerned about strength.
| Date published | 22/01/2018 |
| Quantità di filamento | 143 grams (Or about 47.69 meters.) |
| Tecnologia | FDM |
| Complessità | Easy |
| Supporto Gratuito | YES |
