THE WHITE PRINCESS SHOES
THE WHITE PRINCESS SHOES
3D
Published 2014-04-11T19:13:14+00:00
Step into style with My Mini Factory collection of ladies high heels, The White Princess heels are the latest release of 3D printed shoes from MyMiniFactory. Take your style to new heights!
This free design is a size 36, (but other sizes are available on demand)
There are six files to download, two for the shoes and four for the inner soles.
You will need some thin leather (20 by 20 cm), and some leather straps (280 mm length 18 mm wide, 4 mm thick. The sole is available any cobbler (rubber thickness 4 mm)
Print the shoes with maximum infill, not too much support, same for the inner sole.
Inner sole: you need to glue them together (we suggest super glue) and then wrap the leather around the plastic inner sole and glue it underneath, then glue the inner sole into the shoes.
Sole: use the pattern we have included in the zip file, cut the sole out of the rubber and glue to the bottom of the shoes with super glue.
| Date published | 11/04/2014 |
| Quantità di filamento | n/a |
| Dimensioni | 180 *70* 190 |
| Complessità | Difficult |