Third Person View Drift Body for WLToys 1 28th scale RC cars
Third Person View Drift Body for WLToys 1 28th scale RC cars
Published 2019-04-02T14:12:38+00:00
Hello, and thank you for checkin out my design.
I designed this body to hold a camera in the third person view and rotate the view with a headtracker and a 9g servo. It should fit (K969 K979 K989 K999 P929 P939) models as long as the rims and tires will not bind on the body.
NOTE: I had extended my rear axleto the back mounting points, extending the wheelbase by 3 or 5 mm. This mod must be done to ensure the wheels will fit properly.
There is a file that ends in "moused" which has some circles to help with bed adhesion for ABS, which is what I used when I printed it.
Mine was a p929. I replaced the stock wheels and tires with drift ones and extended the wheelbase with the extra part that was included in my kit (thanks WLtoys!).
There is a clip-in spot on the right for an Eachine ATX-03. There is a snug spot at the front for a small battery for the vtx and camera. The clip-in camera mount is for a Runcam Nano.
Parts list:
WLToys 1/28 RC car with drift wheels/tires
Standard towerpro style 9g servo
Eachine ATX03
RunCam Nano
Small 1s battery for video system
***The lights (optional) are all 3mm LEDs, 6 in the rear and 4 in the front. I control mine with an arduino pro micro.
Thanks for looking!
Added files for driver side vtx configuration. This should keep the vtx away from the heat of the motor.
The main body and the camera mount need supports.
Date published | 02/04/2019 |
Tecnologia | FDM |