V-King CoreXY V2.0
V-King CoreXY V2.0
3D
Published 2018-08-28T17:05:41+00:00
NEW! - High performance - Big Volume - CoreXY 3d Printer!
V-King - Design Benefits: https://youtu.be/wINF7qM0DQU
New and improved hypercube type design with build volume of 340x380x300 - All Wheels and Belts running smooth!
No rods or bad bearings - No bent lead screws - No Wobble Trouble!
You can support the development here:
https://www.buymeacoffee.com/pro3d
Communities:
FB Page: https://www.facebook.com/vking3d/
FB Group: https://www.facebook.com/groups/viking3d/
Github repository with all latest iterations:
https://github.com/RoyBerntsenDesign/V-King
High performance design
- Rigid all V-Slot linear movements
- Light XY carries for high acceleration and jerk
- CoreXY linear moving top gantry
- Big build volume with less frame space
Low maintenance design
- All running V-Wheels
- No gliding movements
- All belted movements on XYZ
- No lead screws causing wobble or backlash
- Limited complexity
Accessible standardized hardware
- Easy to print the parts
- Easy to use
- Easy to service
Using all open source components as standard
- e3d V6 hotend
- e3d Titan extruder
- Nema 17 Stepper motors
- Ramps controller
- Marlin firmware
Slicer Recomendations
Material: CPE/PETG or similar as is more durable than PLA
Walls: 1.5 mm Shell
Bottom/Top: 1.5 mm shell at 0.2-0.3 layer height
Infill: 25%
You do need a good calibrated extruder as parts are tight so check your flow
All parts are modeled with tolerance to fit
Support is needed on some parts
| Date published | 28/08/2018 |
| Tempo per farlo | 70 - Minuti |
| Quantità di filamento | 1000 Gram |
| Dimensioni | 600*600*600 |
V-King CoreXY the Original The original prototype for the V-King CoreXY printer