Washing Machine Door Hook / Catch door
Washing Machine Door Hook / Catch door
3D
Published 2017-11-16T11:09:33+00:00
This is a replacement part for a washing machine. It is part of the mechanism to close and lock the door.
The reference is WH10X10004. It can fit models from GE and GE’s brand (like Frigidaire, Hotpoint, Kenmore,…).
This part is subject to stresses so it might break faster than the original part. I recommend to print it in strong materials (like ABS or Polycarbonate)
You can buy it 3D printed on Ebay: https://www.ebay.com/itm/112618062687
You should print the part in ABS or Polycarbonate.
Print the part with the flat surface on the platform.
I recommend 100% infill (as the part needs to be as strong as possible) and a layer height of 0.2mm or lower (to increase adhesion between the layers).
No need for support.
| Date published | 16/11/2017 |
| Tempo per farlo | 48 - Minuti |
| Quantità di filamento | 7 |
| Dimensioni | 65.8mm x 21.3mm x 32mm |
| Tecnologia | FDM |
| Complessità | Medium |
| Supporto Gratuito | YES |
