Yet Another Ikea Lack Enclosure (Wanhao Duplicator Plus)
Yet Another Ikea Lack Enclosure (Wanhao Duplicator Plus)
Published 2017-03-09T10:39:29+00:00
Looking for an enclosure for a Wanhao Duplicator Plus, I came across many different designs utilizing the Ikea Lack table. I dislike asymmetrical design that put all the height in the feet, and figured that if I designed an enclosure having matching pieces at the top and bottoms of the legs that it would give me also provide a way to hold plexiglass sides.
Here are the goals I have with my design:
- symmetric design
- built-in side holders
- mount on top of an existing computer desk
- integrated hinges, door stops, mounting points
I created a few different designs and modified as I went. Thanks to many great designs I didn't have to start from scratch, specifically I have used or incorporated the following objects:
- Lack Filament Grommet (http://www.thingiverse.com/thing:1821844)
- Quick Hinge (http://www.thingiverse.com/thing:47591)
- Door Handle (http://www.thingiverse.com/thing:36465)
For the most part everything worked the first time. My pictures are of my first version, but the stl files here fix a few of the issues I ran into in assembly. The two basic changes are: 1) added mounting points to the inside of the corner brackets to securely attach to the table top and base; 2) added stops to the hinge bottoms to hold the door in place without screws; 3) enlarged the hinge holds on the hinge parts so that the printed hinge pins fit.
The pin on my original hinges proved too brittle and broke off. I took a drill bit and drilled out the broken part and cleaned up the hole on the other part, then screwed a simple machine screw in each and it works perfectly.
Date published | 09/03/2017 |
Tempo per farlo | 720 - Minuti |
Tecnologia | FDM |